OSHA Class 3 Orange Construction, Safety Vests

Site Map
Pay Pal Accepted
ANSI CLASS 3
Examples of workers who use Class 3 safety vests:
  • Roadway construction personnel and flaggers
  • Utility workers
  • Survey crews
  • Emergency response personnel

OSHA Class 3 Orange Construction garments provide the highest level of visibility, and are intended for workers who face serious hazards and often have high task loads that require attention away from their work. Garments for these workers should provide enhanced visibility to more of the body such as the arms and legs


Orange Class Three, ANSI 2010 Safety Vests - Sleeved
S3261O-LZ & SM3261O-LZ
Class Three ANSI 2010
SLEEVED ORANGE Safety Vests
Lime Stripes


Front




Back

The Orange ANSI Class 3 level 2 vests are designed for high traffic areas over 55 mph. The vests are constructed with a soft and flexible polyester material.
These vests come with one pocket on the inside; however, they do not have outside pockets since that may interfere with ANSI class 3 guidelines.

  • 2 vertical stripes and 2 horizontal bands of 2" reflective material.
  • Material can be washed
  • Comes with a standard zipper front closure but can be ordered with a VELCRO® brand closure.
  • Available with Lime Hi-Gloss 3M stripes, but can be special ordered for the same costs with Silver stripes (minimum order is 12 and allow 1-2 week lead time)
  • The Class 3 vests can be imprinted with a company logo and still meet Class 3 Regulations
  • Meets ANSI/ISEA 107-2010 recommendations for Class 3 safety garment
  • Flame retardant material.   Click here for more information  
  • Made in USA
  • Available in a solid material and a mesh material
  • Note 1
    The following vests do not have enough square inches of material to be classified as a Class 3. These vests have the same design with the 2 horizontal bands; however, they will only be classified as a Class 2 on the label.
    • ANSI 2004 Sleeved Size Small

Mesh Fabric Detail
Standard Fabric Detail

Orange Class Two, ANSI 2010 Safety Vests - Sleeveless
3261O-LZ
Double Stripe Design
ANSI 2010 Sleeveless Class 2
Lime Stripes


Front


Back

The Orange ANSI Class 2 level 2 vests are designed for high traffic areas over 55 mph. The vests are constructed with a soft and flexible polyester material.
These vests come with one pocket on the inside; however, they do not have outside pockets since that may interfere with ANSI class 3 guidelines.

  • 2 vertical stripes and 2 horizontal bands of 2" reflective material.
  • Material can be washed
  • Comes with a standard zipper front closure but can be ordered with a VELCRO® brand closure.
  • Available with Lime Hi-Gloss 3M stripes, but can be special ordered for the same costs with Silver stripes (minimum order is 12 and allow 1-2 week lead time)
  • Meets ANSI/ISEA 107-2004 and 107-2010 recommendations for Class 2 safety garment.
  • The Class 2 vests can be imprinted with a company logo and still meet Class 2 Regulations
  • Flame retardant material.   Click here for more information  
  • Made in USA
  • Available in a solid material and a mesh material

  • Note 1
    The Sleeveless Double Verticle Stripe Class 2 vests only meet the new ANSI 2010 Class 2 regulations and is printed this way on the vest label. In order to meet the new ANSI 2010 Class 3 Regulation and have that printed on the label, the vests will need to be made with the sleeves (below).


Mesh Fabric Detail
Standard Fabric Detail

VELCROŽ is a registered trademark of Velcro Industries B. V.

Contact Us
Email Us

OSHA Class 2 Lime Construction, Roadside Vests
OSHA Class 3 Lime Construction, Road Side Vests

Specialties
  Phone 800-646-5346 Toll Free
  Fax 325-646-3790
  Email  

OSHA Class 3 Orange Construction, Safety Vests