Class Three ANSI 2010 SLEEVED
LIME Safety Vests with Silver Stripes
Class Three ANSI 2010 SLEEVED
LIME Safety Vests with Silver Stripes
Front
Back
The Lime ANSI Class 3 level 2 vests are designed for high traffic areas over 55 mph. The vests are constructed with a soft and flexible polyester material. These vests come with one pocket on the inside; however, they do not have outside pockets since that may interfere with ANSI class 3 guidelines.
2 vertical stripes and 2 horizontal bands of 2" reflective material.
Material can be washed
Comes with a standard zipper front closure but can be ordered with a VELCRO® brand closure.
The Class 3 vests can be imprinted with a company logo and still meet Class 3 Regulations
Available with Silver Hi-Gloss 3M stripes, but can be ordered for the same costs with Orange stripes (minimum order is 12 and allow 1-2 week lead time)
Meets ANSI/ISEA 107-2010 recommendations for Class 3 safety garment
Note 1
The following vests do not have enough square inches of material to be classified as a Class 3. These vests have the same design with the 2 horizontal bands; however, they will only be classified as a Class 2 on the label.
Sizes Sm-XXL typically in stock. Larger sizes and large orders of safety vests require a 1-2 week manufacturing time.
Double Stripe Design - ANSI 2010 Sleeveless Class 2 Lime Safety Vests with Silver Stripes
Double Stripe Design
ANSI 2010 Sleeveless Class 2
Lime with Silver Stripes
Front
Back
The Lime ANSI Class 2 level 2 vests are designed for high traffic areas over 55 mph. The vests are constructed with a soft and flexible polyester material. These vests come with one pocket on the inside; however, they do not have outside pockets since that may interfere with ANSI class 2 guidelines.
2 vertical stripes and 2 horizontal bands of 2" reflective material.
Material can be washed
Comes with a standard zipper front closure but can be ordered with a VELCRO® brand closure.
Available with Silver Hi-Gloss 3M stripes, but can be ordered for the same costs with Orange stripes (minimum order is 12 and allow 1-2 week lead time)
The Class 2 vests can be imprinted with a company logo and still meet Class 2 Regulations
Meets ANSI/ISEA 107-2004 and 107-2010 recommendations for Class 2 safety garment.
Note 1
The Sleeveless Double Verticle Stripe Class 2 vests only meet the new ANSI 2010 Class 2 regulations and is printed this way on the vest label. In order to meet the new ANSI 2010 Class 3 Regulation and have that printed on the label, the vests will need to be made with the sleeves (below).